5 respostas a este tópico

[platin]

Finalmente saiu a rom do blefish 
http://forum.xda-dev...d.php?t=2427182
 
"This ROM is a work-in-progress.
There are multiple bugs that wn't let you have a good experience, but this ROM will improve in time.
I will provide updates to this ROM in a 2 week schedule, or earlier if needed."
 
Ainda tem muito trabalho pela frente mas ja começa a ver-se a luz ao fundo do tunel
 
clicar aqui 

Spoiler

Prequisites.

404020 baseband installed.(Official 2.3 installs this)
/system with more than 300MB available (forumber partition table/BlePart_1 (to come))

Installation.

• wnload the flashable zip.
• Reboot to recovery.
• On first install, wipe /data and /cache.
• Install the flashable zip.
• Optional: Install Gapps.
• Reboot to normal mode.
• Done.

Features implemented.

• 3.4 kernel - No Huawei silliness included!
• Chip manufacturer provided accelerometer/magnetometer driver.
• Chip manufacturer provided touchscreen drivers.
• Optimized kernel for stability (removed unneeded drivers).
• Atmel TS can now use up to 10 fingers at once.
• New Light/Proximity driver (APS-12D) - Created by me from scratch.
• Allows light sensor to show all values from 0 to 64000lux. Proximity driver is faster.
• Device Settings - a CM specific application for changing phone's internal settings.
• Vibration intensity scaling - scale vibrator voltage from 1.2V to 3.1V (3.0V default)
• USB OTG - Attach any USB device ONTO your phone. Does not require external power supply (outputs 200mA/5.0V).
• Does not need any special cables, however regular USB OTG cable is the simplest way to use.
• Force internal microphone - use the phone's microphone even when headset is connected.
• Low Power Audio.
• Any other feature the CM team has implemented.

Bugs present.

• Display is not very smooth (34fps average).
• Wi-Fi may not start on first boot. Wi-Fi may not start when the memory is fragmented (likely error for the first boot).
• Wi-Fi may not connect successfully, while showing it is.
• *Note: Toggle the Wi-Fi on/off or do a scan to see if Wi-Fi is connected properly.
• *Note 2: I am writing a new Wi-Fi driver, which should resolve all these problems.
• Automatic Brightness is not working.
• *Note: You can supply me with a table containing lux=brightness for about 10-15 values.
• USB OTG may not work all the time.
• *Note: Toggle the OTG mode on/off and try again.
• Battery charger may disable charging on dedicated charger mode.
• *Note: Don't let the phone go to sleep if you want to charge on dedicated mode.
• Battery capacity percent is not stable.
• Synaptics TS driver does not power off (reacts to home key even in suspend).
• Atmel TS driver does not always recognize finger release.
• Display may not always turn on.
• *Note: Toggling the display on/off several times helps.
• On no service, signal strength may show a wrong value.
• HD video playback is stuttering every few seconds.
• Notification leds are not implemented.
• NT35510 is not implemented (it may work with NT35582 driver).
• Camera is not implemented.
• FM Radio is not implemented (Spirit may work).
• TV Out is not implemented.
• Overclocking is not implemented.

Downloads.

•    cm-10.1-20130831-UNOFFICIAL-u8800.zip
•    cm-10.1-20130909-UNOFFICIAL-u8800.zip
•    cm-10.1-20131002-UNOFFICIAL-u8800.zip
•    cm-10.1-20131002-UNOFFICIAL-u8800-update1.zip
•    cm-10.1-20131027-UNOFFICIAL-u8800.zip
•    cm-10.1-20131027-UNOFFICIAL-u8800-update1

     
Credits.
dzo
Code Aurora Forum
CyanogenMod

 
 
é a 1º vez que posto uma ROM no forum, alguma coisa de mal, por favor digam-me

Editado por platin, 17 November 2013 - 15:53.

[platin]

09.09.13

• Rebased kernel on caf/jb_2.5 (newer kernel). Updates core kernel drivers (MDP, KGSL, USB, etc)
•  
• Fixed display freeze on boot sometimes.
•  
• Fixed display not turning on at all times (confirm?).
•  
• Changed display brightness scaler.
•  
• Fixed Wi-Fi not connecting to network properly.
•  
• Increased virtual key width (50 to 60).
•  
• Decreased speaker amplifier gain (12db vs 8db). Makes speaker not so distorted at higher volumes.
•  
• Added /cust partition to Android (default read-only).
•  
• Changed battery driver (SOC still not stable, in progress).
•  
• Fixed most charger problems.
•  
• Fixed alarms not triggering.

       Link

Editado por platin, 09 September 2013 - 20:08.

[platin]

Link

 

02.10.13

• Fixed display FPS.
• Fixed NT35510 freeze upon unsuccessful turn on.
• Fixed battery reporting 0.
• Fixed battery temperature set to 35 without USB.
• Added CRT-off animation (changeable in the Settings).
• Enabled some memory optimizations (introduced by the CM team).
• Improved NT35582 FPS to 51-53 average.
• Modified battery charging times (should fully charge, not tested).

[platin]

Released update 1

 

link

 

 

Changes:

• Added battery indicator leds. Leds are not pulsed right now.
• Modified magnetic sensor calibration. Delete /data/misc/sensors/lsm303dlh_mag if magnetic sensor is inaccurate and calibrate again.
• Half fix screen turn on on call. In testing.
• Changed battery/charger more, should deal with all error cases properly now.
• Modified small speaker config (should increase volume, in testing).

[jorgepro8]

Como está esta ROM? queria mudar a minha que é a CM7.0 GB 2.3.7 para esta

o que tenho de fazer? esta é 4.1 né?

[platin]

Esta é a versão 4.2.2 já com o kernel 3.4.0 já está bastante funcional mas tem alguns bugs, para mim, o sensor de proximidade e a informação dada pela bateria ( ora marca bem ora marca mal)é o que me impede de o usar diariamente ,pelo que tenho visto o developer esta a preparar a versão 4.4 ,cm-11 pelo que se calhar mais vale esperar um pouco mais Sent from my SM-T210 using tapatalk v4

Editado por platin, 07 January 2014 - 13:12.